Fire-Dex 1910 Traditional Helmet Deluxe

Details
1910 Traditional Helmet Deluxe
Features a fiberglass compression-molded shell with superior flame and heat resistance, thermal impact cap, ratchet adjustment, and an adjustable headband to fit all SCBA’s.

UL Certified to meet or exceed NFPA 1971, current edition.

Deluxe Features:
Removable/replaceable, 2-Layer Black earlap with NOMEX® and FR Cotton
3M triple trim trapezoid
Leather sweatband and nape
Eye Protection options:
4″ Visor
Goggles
Goggles & Bourkes
Helmet Shell:
Flared, rear-brim design with a length of 15 5/8”, a width of 12 ¼” , and a height of 7”
Traditional style with four (4) primary and four (4) secondary ribs bisecting the dome
Composite fiberglass with a thermoset resin
Color: Yellow
Color pigment is added to the resin
Matte finish
Aluminum reinforced elastomeric edge beading that is secured at the brim rear with a stainless steel clip and D-ring fastened by a stainless steel rivet
Stamped, embossed, brass eagle front attached by six (6) solid brass screws and three (3) sleeves
The beak of the eagle is formed to hold the top of a leather identification shield
Helmet Impact Liner System:
Urethane foam liner adhered to a high heat resistant inner shell
Hook and loop material attached to secure the impact liner system to the helmet shell
Hold down clips mounted to the helmet shell extend over the impact liner
Helmet Suspension System:
Three (3) ¾” nylon web straps extending to six (6) locations around the impact liner
Attached to a gasket that is located in the lip of the impact liner
Adjustable for helmet height with a six (6) point tie system
Helmet Headband:
Quick adjustment sizing capability by means of a ratchet adjustment system attached to a heat resistant nylon headband
Attached to the impact liner system by four (4) nylon screws
Height adjuster located at the rear of the headband inside the impact liner that allows at least 1” of travel by means of two (2) height adjustment keys for proper fit
Helmet Chinstrap:
Two (2) pieces of ¾” black Nomex webbing with a one hand quick release thermoplastic buckle and postman slide
Fully extended the maximum length shall be at least 24” when measured from one attachment point to the opposite attachment point
Helmet Ear/Neck Cover:
Two layers of either a 100% Nomex or a 60% Kevlar / 40% Nomex outer shell backed with FR cotton
Attached to the impact liner with a 3/4” strip of hook and loop material allowing for removal/replacement.
Helmet Retroreflective Trim:
Eight (8) 3M Triple Trim Trapezoids fluorescent lime-yellow
Glass bead based to maximize heat resistance
Eye Protection:
Faceshield:
Hard-coated PPC material designed to fit the contour of the helmet shell brim
Mounted to the helmet shell brim by a glass-reinforced, flame resistant, nylon handwheel on a threaded stud
Certified to meet the optic requirements of ANSI Z87.1 Standard for Eye and Face Protection
Meets NFPA 1971 requirements for heat resistance and impact performance
Goggle:
Full perimeter ventilation and filtration system made from high heat resistant materials
Anti-fog and anti-scratch coatings
Provides 100% UVA/UVB protection and optical clarity and meets ANSI Z87.1 for impact resistance
One piece quick release strap system is made of 26mm wide high memory woven Nomex